Di100FR2 Flash Rotator     

The Di100FR2 is designed for digital camera SLR body types with or without external motors or vertical grips. Folding Flash Rotator - Folds To About 4x5x1"

FEATURES:

Milled 6061T Aluminum Construction
EZ Release Camera Plate With Rubber Grippers
When Rotated to Vertical Flash Remains Upright
Patented Rotation System
Size: 4-1/2x4-1/2x5
Weight: 8.5 oz.
1/4-20 Tripod Socket in Bracket Base.
1/4-20 Tripod Socket in Camera Plate.
Shipped as Shown With Hex Keys & Screws.
Milled Internal Arms Allow Secure Rotation.
Tumbled Black Anodized Finish For a Professional
     Look and Feel.
 
 
 
The Di100FR2 is the ideal bracket for the photographer that wants to use his camera and bracket for  hand held candid photography.  The Di100FR2 can be used on a tripod but the tripod head must be rotated to vertical and then the flash turned to the vertical position.  Newton has designed this bracket to be used on the camera as you would use the camera if the bracket were not attached.  When hand holding your right hand is always on the camera grip and your left hand should be under the base of the bracket for support.  Doing this will allow the fingers on the left hand to zoom or focus the lens and relieve stress on your right hand and wrist.  When carrying the bracket and flash always use the camera grip and not the bracket.  Never carry your system by the bracket as this can cause undue stress on the tripod socket of your camera and could also cause some of the bracket parts to work loose.
Flash Accessories Are Shown Below. Choose the one you need for the flash you are using.  Highlight the image for more information.

2-10102- Canon/Nikon  Dedicated Cord holder

1-10102 -
2-3" Extender.
 
 
Camera Plate Attached
To Bottom of Camera
 

2-104-

Handle Mount Unit

5-108 Replacement plastic knobs.


5- 110

Aluminum Knurled Knob 
 

 

5-102-

EZ Accessory Release
 
 
Tripod Socket Shown
In Bracket Bottom
The Di100FR2 is a folding flash rotator that can be stored easily in your camera bag.  It is recommended that you use the 5-102 EZ accessory release unit so that the 2-10102  dedicated cord holder or other flash accessory can be removed easily before storing.